Operating wavelengthMode Field DiameterCladding DiameterCoating Diameter
Fiber Parameters
Cable Parameters
Mechanical and Environmental Characteristics
1. Fiber cable mechanical performance 1) Tensile Strength Test Method: IEC 60794-1-2 E1 Test Length: ≥50m Chuck Diameter: 250mm Tensile Rate: 10mm/min Tensile Loading: Long Term 300N;Short Term600N Test Condition: Short- term loading duration: 30 minutes; Short- term loading duration: 5 minutes Acceptance criterion: Single mold the smallest change less than 0.2dB; Multimode mold the smallest change less than 0.3dB
2) Squash Test Method: IEC 60794-1-2 E3 Test Condition: 1000 N/ 10cm, Lasting 1 minutes Acceptance criteria: Single mold change less than 0.2dB; Multimode mold change less than 0.3dB No sheath broken and fiber cracked
3) Impact Test Method: IEC 60794-1-2 E4 Hammer height: 150mm Impact Weight: 20N Impact Weight: 3 times, Spacing of each impact point Single mold change less than 0.2dB; Multimode mold Change less than 0.3dB
4) Repeated bending Test Method: IEC 60794-1-2 E6 Chuck Diameter: 200mm Bending times: 1000 times Acceptance criteria: Single mode less than 0.2 dB; Multimode mode less than 0.3 dB
5) Winding Test Method: IEC 60794-1-2 E8 Cycle times: 1000 Loading speed: cycle/minute Wheel diameter: 100mm Loading: 40N Acceptance criteria: Single Mode change less than 0.2dB; Multimode mode change less than 0.3dB
2. Fiber cable environment performance 1) Temperature attenuation characteristics Test method: IEC 60794-1-2 F1 Test Temperature: low temperature -20℃, high temperature +70℃ Retaining time each temperature 8h Cycle times: 2 Accept criteria: Single Mode change less than 0.3dB; Multimode mode change less than 0.5dB 2) Combustion performance Fire resistance: IEC 60331-25 Flame resistance: IEC 60332-1-2 The tendency to spread: IEC 60332-3-22 Halogen content: IEC 60754-1 Smoke density: IEC 61034-2
3. Fiber cable identification Outer sheath marked with black identification, the interval is 1m, Identification is as follows, Other information can provide according to customer requirements 1) Fiber cable type and fiber core number 2) Name of manufacture 3) Year of manufacture 4) Length Identification
|